CyberKLOTZ (version 1.0)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The goal of my Cyberdeck was to keep the system simple by using only the Raspberry Pi as the main hardware.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The main idea behind my Cyberdeck was to keep the system as simple as possible by using only the Raspberry Pi as the central hardware. This approach was intended to avoid adding additional components that might not be compatible with the system from the start or require modifications to the configuration file.
The goal was to create a simple plug-and-play system that works with no or minimal configuration.
The front and back plates were also intentionally designed to be simple, making them easy to replace or modify if needed.
Printed in PETG.
What you need: (tested and working)
7 inch DSI Touchscreen Display 800x480 LCD (use the included hex Standoffs)
MRSVI Mini Keyboard A8 Plus or Rii X1 Mini Keyboard
Anker 20000 mAh 86W Powerbank (with integrated usb-c cable)
16x Brass Nuts threaded inserts M3*6*5
16x M3*8mm socket head screws
1x mini switch 2 pin 21mm*15mm
2x usb-c female connector to 6-pin (2-pin is not working because of the powerbank)
1x short usb-c male to usb-c male
Raspberry Pi 4 (other not tested)
Wire the 2x USB-C to 6-Pin :
black-black
blue-blue
white-white
yellow-yellow
green-green
red-switch-red