1 / 5
Quinny Buzz Parason adaptor — zdjęcie 1
1 / 5

Quinny Buzz Parason adaptor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an adapter for the Quinny Buzz stroller that holds the Parasol. The original (broken) one is the black one, as…

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
146
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is an adapter for the Quinny Buzz stroller that holds the Parasol. The original (broken) one is the black one, as seen on the pictures. My design is a bit more cruel, decided to lean towards function over form. You can find this adapter online for around $30, but if you do have a 3D printer it comes out almost free.

Thing was put together using TinkerCAD, if you want to do any additional modifications here's the link on TinkerCAD.

If you found this useful, please consider donating, just want to see if this Thingiverse feature works or not!

Print Settings

Notes:

Of course you should be needing a good support for this model, play around with the settings on your slicer. I used zig-zag on my Cura setup. Printed it at 0.1mm resolution, 3 walls on the shell and 8 top/bottom layers. Infill at 40% seems to work fine. I also moved the piece down a bit, so as the boxy portion would touch the build plate.

Category: Replacement Parts

Tagi