1 / 8
JBL 3.1 soundbar mount for Hisense SmartTV 4K FFM — zdjęcie 1
1 / 8

JBL 3.1 soundbar mount for Hisense SmartTV 4K FFM

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I designed mounts which fit and replaced the TV's legs (which I had hung) and had holes to attach the soundbar mounts.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
46
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution — Share Alike

I hung our TV on the wall and wanted to lift the soundbar off the console as well. I designed mounts which fit into and screwed into the attachment points for the legs, using the same screws. The mounts extend down enough so that there is clearance to install the soundbar.

The mounts have lips in the back which brace against the leg attachment area to help provide stability.

It's possible that a different TV and soundbar from the same companies would work, but it's also possible you'd have to make adjustments.

Hardware needed:

  1. JBL 3.1-Channel 4K Ultra HD Soundbar with Wireless Subwoofer: https://mm.jbl.com/soundbars/JBL+BAR+3.1.html

  2. Hisense - 55" Class U7 Series Mini-LED 4K UHD QLED Smart Google TV (2024)

  3. Wall mounting hardware which came with your soundbar: mounts and screws

  4. M3 x 20mm bolts x 2

  5. M3 heat set inserts x2

  6. M3 nuts x2

  7. Washers with inner diameter large enough for the bolt to pass but small enough to occlude the nut

You could probably use the heat set insert OR the washer and nut, but I had all of the pieces already and wanted reassurance.

To install the mounts:

  1. Print the mounts.

    1. PETG, 0.08mm layers

    2. 6 walls, 6 tops, and 6 bottoms

    3. Snug supports & brim.

  2. Sink a heat set insert into the back of each of the mounts.

    1. You could insert it from the front but inserting it from the back provides greater security, since the force applied by the soundbar will attempt to pull the insert through the mount.

  3. Place and screw the mounts into the bottom of the TV.

  4. Attach the mounts which came to the soundbar to the 3d printed mounts.

    1. Insert the bolt into the soundbar mount

    2. Place the bolt through to the back of the printed mount

    3. Screw the bolt into the heat set insert

    4. Once the bolt starts to protrude out the back of the mount, add the washer and nut

    5. Tighten

  5. Hang the soundbar and rearrange all of your wires and devices.

Assembly, from back to front:

  • nut

  • washer

  • printed mount w/ heat set insert through the back

  • soundbar mount

  • bolt (passing front to back)

  • soundbar w/ mounting bolts installed

If you lost the mounts which came with your JBL soundbar, you can search for "JBL Soundbar Halterung - JBL Soundbar Wall MOUNT" to find the model. You'll need the mounting pins which came with the soundbar though.

Tagi