XIAO RS485 Breakout board for ESP32S3 and variants
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reference model of the RS485 breakout board that suits the Xiao ESP32S3 and variants for use in modelling accessories
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a reference model to assist in creating cases and other accessories to the RS485 Breakout Board (https://wiki.seeedstudio.com/XIAO-RS485-Expansion-Board/), and I have included the XIAO ESP32-S3 and Wio-SX1262 module models, not for 3D Printing itself (although....).
It should be within ~0.2mm of the actual products, and I hope this helps in creating cases or anything you intend on.
I've marked it as AI created because it is. I am atrocious with Blender, and after what Astra created when given a Blender MCP (https://www.blender.org/lab/mcp-server/) and enough measurements and description in a prompt to create the Wio-SX1262 module model and XIAO ESP32-S3 with soldered pins I decided to do some of the other XIAO accessories I have. I believe the license has to align to Seeed Studios one that requires attribution but allows remixing etc, but I am happy that you attribute Seeed Studio and forget about me.
edit 10th Sept 2026 10:50am Updated the model with the RS485 and ESP32S3 as I had missed the pinouts so it was just floating there.