Garage storage unit building for wargaming
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Garage for miniature wargaming. Remixed so it has hinges for easy assembly and disassembly. Layer height is at your…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 422
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution
Garage for miniature wargaming.
Remixed so it has hinges for easy assembly and disassembly.
Layer height is at your discression. Usually I go for 0,2mm on terrain
It is recommended to print the parts standing up, so a brim or raft bed adhesion is advised.
Enabling supports for the hinges are also a good idea. If you can, it is a good idea to disable support in the area of the garage door, on the front wall, since it will not do much for quality and is a hassle to remove and clean properly.
Print Settings
Supports:
Yes
Category: Buildings & Structures