Rebelle Ontos (shell pieces only)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A love letter to a great blaster design and Nerf's best blaster line
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 883
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
If something in here is janky, it's because I learned fusion to do this project. Constructive feedback is welcome.
The six individual step files are included. Each body piece is made of a body for each color. This can cause some visible z-fighting when rendering. For Bambu studio, ensure the purple component is at the bottom of each per-object list, so that it has the priority of being shown.
A 3mf has been provided that has the coloring order correct. Other part settings including support painting have been copied from the original project's 3mf. "Purge into infill" has been enabled on all six pieces to help reduce filament waste. The pieces have been crammed onto 3 plates to also help reduce filament waste. The engineering plate is chosen by default, to emulate the smooth finish that Rebelle blasters have. If using PLA, use gluestick and NOT hairspray to get good adhesion.
Further print and assembly instructions can be found in the original project.
The Rebelle decal was commissioned from https://www.instagram.com/kingof.roses?stkn=MmU4aGZ6eHlvcmRo