1 / 4
Frame hole plug for bicycles — zdjęcie 1
1 / 4

Frame hole plug for bicycles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My DengFu E82 came with some holes in the frame I don't use. These are little plugs to fill the hole.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
26
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

If you have a bicycle with holes in the frame that you don't use, you could use this to plug those holes. 

The specific  stl file here is for the DengFu E82 hole on the right side of the swing-arm, where the shifter cable would go if your bike had shifter cables. 

You can use the OpenSCAD file to adjust the parameters for whatever style hole your bike might have. Provided your hole is pill shaped the only parameters you might need to adjust is the Pwidth, Plength and THK parameters.   The Prad parameter is the radius of the curvature, for the curved part of the pill shape.

Settings for standard DengFu E82 holes appear in the source. 

Tagi