Low Cost Filamentalist
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original Filamenytal design felt like the mounting points were a bit too complicated and cluttered.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
The original Filamenytal design felt like the mounting points were a bit too complicated and cluttered.
So I redesigned it to make it easier for the average user to build, using only a few screws and removing unnecessary aluminum profiles.
It works really well in my chamber, and I’ve made x4 sets of it.
Nut
- M3x6 8 pieces main body
- M3x6 8 pieces TubeConnector front
- M3 hex nut and M3x6 or M3x8 4 pieces / M4x8 with M4 profile insert 2 pieces Center Drive Roller Spacer
- M3 hex nut and M3x6 or M3x8 4 pieces / M4x8 with M4 profile insert 2 pieces Body holder back
- Beaing 623zz 1 pieces Accel_DoubleMagnet_MODEL
- Bearing 608 1 pieces Center Drive Roller
- Bearing 608 4 pieces x2 Shaft
- Magnet 6x3 4 pieces
- M3 x 25 1 pieces
- M3x5x4 Heat inset nut 16 pieces
You can get more nut if i missing in original url
https://github.com/v6cl/Filamentalist/tree/main/F1mod/0.2v