1 / 3
Mellow TMC 5160 plus mount — zdjęcie 1
1 / 3

Mellow TMC 5160 plus mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple Mount for TMC 5160

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
59
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I needed a model that would hold all my TMC 5160 drivers individually and have good cooling, so i made one that uses a 4020 noctua fan and 2 DIN rail clips, put heatsinks on the bottom side to increase surface area and im happy with it.

Things you will need

  • standard voron threded inserts x4

  • M3x40 x2

  • M3x35 x2

  • M2x10 x4 self threading

  • M3x well depends on what fan you want 4010 or 4020

  • Heatsink 40x40x14 or what ever you have on hand, helps with colling if you stick them on the bottom

Driver is held in place with 4 screws that go in threaded inserts, fan screws just into plastic and DIN rail clips use self threading screws.

You can rotate the mount how ever you want as space for DIN clips is same as their distance to one another

During longer prints i noticed my drivers dont go over 37 degrees Celsius.

If anyone wants to edit the file there's is a step model