1 / 4
VW T6.1 California Aufstelldach Stange / Pop-up Roof Support Rod — zdjęcie 1
1 / 4

VW T6.1 California Aufstelldach Stange / Pop-up Roof Support Rod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Verhindert das Absenken des Daches. Leichte Montage von Innen. Für 15 / 12 mm Alurohr.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
144
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

Aufstelldach-Stange für VW T6.1 California

Du träumst süß und schläfst tief. Dann plötzlich die Hölle - dein Aufstelldach ist abgesunken, die LED gehen nicht mehr, die Hydraulikpumpe versucht es wieder automatisch hochzupumpen - Du und Deine Nachbarn sind hellwach.

VW hat keine Lösung - ich aber!

Hier einfachste 3D Komponenten, um das Dach von Innen offenzuhalten.

Ich habe zwar auch 2 Sperren für den Scherenantrieb für draußen gebaut (Roof Lock ähnlich) aber für kurze Übernachtungen nehme ich das hier.

Also holt Euch eine Stange Alu 15 mm AD und 12 ID oder eine alte Roll-Up-Stange und spart Euch den Ärger.

Mit dem Clip verstaue ich die Stange unsichtbar im Kleiderschrank.


Pop-up Roof Support Rod for VW T6.1 California

You’re dreaming sweetly and sleeping soundly. Then suddenly, all hell breaks loose—your pop-up roof has dropped, the LEDs aren’t working anymore, and the hydraulic pump is automatically trying to raise it again—you and your neighbors are wide awake.

VW doesn’t have a solution—but I do!

Here are the simplest 3D components to keep the roof open from the inside.

I’ve also built two locks for the scissor mechanism on the outside (similar to Roof Lock), but for short overnight stays, I use this.

So grab a 15 mm outer diameter, 12 mm inner diameter aluminum rod or an old roll-up rod and save yourself the hassle.

I use the clip to stow the rod out of sight in the closet.