Skadis Molotow One4All refill bottle holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bottle holder for Molotow One4All 30ml acrylic paint refill bottles
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Minimalistic paint bottle holder for Molotow One4All 30ml acrylic paint refill bottles. This design is made to match the Vallejo Paints Holder for Skadis Board by VoyMakesMinis but modeled from scratch to fit the Molotow bottles.
The holder fits 6 bottles of paint and comes in two variants; 3 and 4 hook mounting respectively. If mounting these holders on multiple rows on the Skådis board it's recommended to alternate using the 3 and 4 hook models on every other row to optimize the use of vertical space. This is because the length of the paint bottles force you to leave a noticeable gap and waste board space if only using one kind. The picture below illustrates the difference in the vertical gap when using the alternating (left) or same (right) variants.
Printing instructions
Print in upright position, use supports for the hooks.
These should be okay with most standard print settings.
If you have an issue with strength then try increasing the number of wall loops.