Acorn Cup Bowl — Key & Ring Dish, One Part, Prints Upside Down
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bowl shaped like an acorn cup. Ø99.9 mm inside, 37.8 mm deep, one single part. It prints upside down.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
What it is. A bowl shaped like an acorn cup — the cupula the acorn sits in. Ø99.9 mm inside at the narrowest point, 37.8 mm deep, Ø111.6 × 45.0 mm outside. One single part: nothing to glue, nothing to assemble, no supports. Meant as a key, ring or coin dish. No foot, no stem — it stands on a 3 mm wide ring of Ø28 at the apex.
It prints upside down — please do not re-orient it.
Not food safe. A bowl invites the assumption; FDM does not support it. The layer seams cannot be properly cleaned. Dry small parts, yes. Snacks, no.
Tips for printing.
• Single colour by design. Brown or a warm beige carries the shape; the scale relief lives on raking light, not on colour.
• A finer layer height pays off here — the relief is only 0.9 mm deep, and at 0.16 mm the scale edges read far better than at 0.2 mm.
• PETG works and carries more load, but shows more stringing across the relief than PLA.
Happy printing!
If it turns out well, please upload a Make with a photo. That is the best feedback a design can get, and it helps other people decide whether the model is worth their filament. A like or a follow is always welcome too.
WANT TO SELL WHAT YOU PRINT?
On Etsy I sell files that come with a commercial license. You may sell the printed objects — no quantity limit, no time limit.
NO PRINTER?
I print to order and ship within Germany.