1 / 1
Robo Guard ikea volfgang chair
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
stops the robot vaccume from climbing and getting stuck on the chair legs. Fits cylindrical objects of 16mm in diameter
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
modeled afther the legs of the ikeas volfgang chair.
stops the robot vaccume from climbing and getting stuck on the chair legs. Fits cylindrical objects of 16mm in diameter
made a guard with 1 wall and one with two walls.
i recommend the two wall guard
for strength, print in upright/standing position. no supports are needed
