Rugged Box for GL-iNet Slate 7 Travel Router & UGreen GaN 65W PSU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the travel router and a bunch of accessories. Inserts provide shock protection and organisation.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of the parametric rugged box, and some newly designed custom inserts to take a UGreen GaN 65W PSU, it's international adapters, several USB and ethernet cables, and the GL-iNet Slate 7 travel router.
There are already a few of these rugged boxed on Printables for this router, but none quite like i wanted, so I designed my own. This one has a custom designed insert for the router and the charger/PSU I had. I quite enjoyed the process of tracing the parts, and arranging them to fit, then tweaking to ensure they could be removed easily, then optimising the model to reduce the quantity of filament and speed up printing time. It's been a journey!
I was also using this to tune my printer for reliably printing flexible filaments- if you print the inserts out of this it'll offer some shock protection for the box contents.
This model will need 6x M3 30mm cap screws to assemble. I printed the box out of PLA, which should be plenty strong. The seal, latches, lifter, and net were printed out of TPU with extra perimeters (effectively making them 100% infill), and the inserts were also printed out of TPU, but with only 10% cubic infill to make them a bit more cushiony.
You will see two Fusion files attached- one with the Rugged box and modified lid/retaining net. The other has the box and inserts- with a different lid with wedge shaped 'islands'. This different lid was my first attempt at a way to store the ethernet cables, but it didn't work well at all. The one with the 4x pegs and the net is definitely the way to go. Instead of chopping and changing the files i have just uploaded everything. The STL (and 3x3MF) files are all you really need to print this unless you are in to tinkering.