Centauri Carbon 1 CANVAS Hotend Wiper Catch Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer to place under the new Poop Chute Hotend Wipe Blade. Prevents the trailing of filament boogers onto the printbed.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 74
- Wydruki
- 1
- Wyświetlenia
- 496
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small spacer designed for the Elegoo Centauri Carbon 1 equipped with CANVAS. It installs underneath the metal catch/bracket on the hotend/nozzle wiper assembly, slightly changing the position/height of the factory metal catch.
I created this part to provide a simple, clean way to space the metal catch without using washers or other improvised hardware. The spacer follows the shape of the original metal piece so it fits neatly underneath it and maintains a factory-like installation.
The model is approximately 1 mm thick and uses the existing mounting location, making it a quick print and easy modification.
Installation: Remove the metal catch from the hotend wiper assembly, place this spacer underneath it, then reinstall the catch and existing hardware.
Recommended print settings: PETG, ABS, or ASA are preferable due to the printer's enclosed environment. Print flat with 0.2 mm layers, 3+ walls, and 100% infill. No supports are required.
Designed specifically for the Centauri Carbon 1 / CC1 with Elegoo CANVAS Poop Chute.
Note: This is an unofficial user-created modification and is not affiliated with or endorsed by Elegoo.