Playtronica TouchMe USB Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
USB Protector for the Playtronica TouchMe MIDI Controller
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A protective casing for the Playtronica TouchMe MIDI controller board, originally designed for Conductive Music to protect their equipment during music and STEAM education outreach in schools.
See LinkedIn post for a brief story about our collaboration.
How to use:
Insert the micro-USB port of the TouchMe controller board into the slot in the protective casing, then plug in the USB cable from the other side. The USB cable latches on to the micro-USB port, preventing the casing from falling out. The protective casing keeps the USB connector parallel to the TouchMe controller board, preventing the micro-USB port from being pulled loose from the board due to the USB cable being angled inappropriately. To remove the protector, simply unplug the USB cable and slide the TouchMe board out of the slot on the other side.
Print settings:
Printer: Prusa MINI+/Prusa MK3.5
Filament: Multicomp Pro PETG Black (SKU: MC011465)
Layer height (PrusaSlicer profile): 0.20mm SPEED
Supports: Yes (we used organic, build plate only)
Infill: 15% gyroid