Heavy weight concrete Wheels for Worx Landroid WR141E
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heavy weight concrete Wheels for Worx Landroid WR141E
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I decide to create my own wheels for my Worx Landroid WR141e because i didn't know if the other one will fit at my lawnmover.
Some people are using stones on top of the lawnmover to make it heavier for better traktion. I found that this kind of weighting is nothing for my lawnmover. I created a wheel which i can make it heavier with concrete. So you couldn't see this weighting. After concreting one of the wheels will have a weight round about 1900gr. without its visibility.
But this weight has it's price. You have to cut a little bit of the cover from the lawnmover to put the wheels on it. The wheels has a width of 5,5cm (the original has 4 cm).
The tyre is from TPU 90A, so it is soft enough to get a good grip. You can create your own lid, so that you can personalize your wheel. I put a default (my) lid at this project. If you want use this or design you self lids. If you design a new lid, please publish it. Thx.
Lid values:
Diameter Lid: 168mm
Diameter Holes: 158,6 mm
Amount Holes 6
Printed with:
Wheel Rim: PETG-CF, 3 Walls, 20% Infill
Tyre: TPU90A, 3 Walls, 15% Infill
Lid: PETG-CF/PETG (Multicolor), 3 Walls, 20% Infill
What else you need per Wheel.
6 Heat Inserts M3
6 M3 x 8mm Screws