1 / 10

Coin coaster Franc 1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dreamtime24

@Dreamtime24_260164

Realistic Franc 1 coin as a coaster This is a replica of a Franc 1 coin for use as a coaster. The diameter is 10.1 cm…

Ocena: 5 / 5
Polubienia: 5
Pobrania: 95
Wydruki: 1
Wyświetlenia: 366
Oceny: 1

Aktualizacja u źródła: 30 kwi 2022

Informacje o modelu

Źródło: Printables
Kategoria: 2D Plates & Logos
Licencja: Creative Commons — Attribution — Noncommercial

Szczegóły Pliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (9)

Realistic Franc 1 coin as a coaster

This is a replica of a Franc 1 coin for use as a coaster. The diameter is 10.1 cm (3.9 inches).

You can use any filament color which you like for the Franc 1 coaster. The original color of the Franc coin is a silver color.

Let the design to be the upper side on your printer's build plate. The flat side is at the bottom.

The Franc 1 coin comes in 3 flavours.

Coin type A

Coin coaster with top design and flat bottom side with 3 holes for the rubber stoppers on the bottom side. This design is printed in one go. Of course you can use the coin as a coaster also without the rubber stoppers.

Coin type B

Coin coaster with top and bottom design. There are 3 holes for the rubber stoppers on the bottom side. The print consists of the top and bottom part separate. The parts must be glued together after the print with the flat sides facing each other. Of course you can use the coin as a coaster also without the rubber stoppers.

Coin type C

Pure coin with top and bottom design without any holes on the bottom part. The print consists of the top and bottom part separate. The parts must be glued together after the print with the flat sides facing each other.

Enjoy printing these items.

Print Settings

Printer:

FLSUN Super Racer

Rafts:

Supports:

Resolution:

0.2 mm initial layer, 0.2 mm layer height

Infill:

20 %

Filament:

TINMORRY PLA
Silk Silver

Notes:

Nozzle not larger than 0.4 mm to print the fine details.
Post-Printing

Glue round rubber or foam sheets (optional)

You may want to glue 3 round 10 mm (0.4 inches) rubber or foam sheets with 2.5 mm thickness to the bottom holes of coin A and B. This will make the coaster sit on the table in a stable way.

How I Designed This ===================

Coin design

The coin was designed with Blender. I have designed the base coin first. Using a reference photo I have extruded points to match the text and ornaments on the top and bottom surface.