Cranked hinge for 18mm doors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a entirely 3d-printed hinge that I've designed to allow an 18mm MDF door to pivot adjacent to an 18mm panel.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 196
- Wydruki
- 1
- Wyświetlenia
- 1560
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a entirely 3d-printed hinge that I've designed to allow an 18mm MDF door to pivot adjacent to an 18mm panel.
I used 4 x 4mm x 20mm screws and the model is sized for these.
Apart from screws, no additional hardware is required. Make sure you reinforce the infill around where the 'pin' joins the body.
If you want the hinge on the right hand side of the door, simply mirror both parts on your slicing software.
I've included the .IGES file so you can modify the design to suit your needs.
Print instructions
Unassociated tags: 18mm ply, Cranked hinge, door hinge
Category: Replacement Parts Print Settings
Printer Brand: Prusa
Printer: i3 MK2.5
Rafts: No
Supports: No
Resolution: .2
Infill: 50%
Filament: Amazon Basics PETG White
Notes:
Print each half on its bottom.