1 / 1
Swisson XMT-500 DMX tester XLR and Ethernet Dongle holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple holders for XLR adapters and the Swisson dongle.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple holders for XLR adapters and the swisson dongle.
Designed in 2 parts to make the item stronger, print the clip on its side and the holder the correct orientation.
If you've a decent printer these will just slot together but you can glue them for piece of mind.
Designed for Neutrik 3>5 and 5>3 but most will fit, use a small bit of LX tape around the barrel for the perfect fit.