Filament Swatches Storage Box 90pcs version, Filament Sample Swatch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Filament Swatch Storage Box for Swatches from @Whity Can fit 90 pcs of swatches! Fit small printbed.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Filament Swatches Storage Box 90pcs version
I found the original design by @Whity is a bit toooo big.
So I remix it into a smaller one, 90pcs should be quite enough for most of us.
And it can also be printed on smaller printbed as well.
I also slightly midified the design of the hinges and lock, the end of the screws hole is now sold instead of a open hole.
Printed part guide
PETG/ASA/PC works best, PLA is NOT recommended for the sake of long-term storage.
30mm screws x4 is needed
a piece of standard Ø1.75mm flexable filament will make the seal o-ring
……………………………………………….
You are good to go 😊
☕ Please consider downloading, leaving a like/review, adding this to your Core One collection, and sharing with your friends!
💰 As a student major in Archaeology, I do all these by myself in my spare time, and am self-funded.
I do not accept donations. If you wish to give something back, please consider using my referral code when purchasing from Prusa: @JamesW_2136542 (enter at the check-out)
Hope you find this helpful!
Happy printing, and may the freedom be with you.