Quest 3 FOV Enhancer Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gives the illusion of a higher FOV in the headset. I've found it helps relieve the claustrophobic feeling of the headset
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution
This gives the illusion of a higher FOV in the Quest 3. I've found it mainly helps to alleviate the claustrophobic feeling of the black void edges, letting my eyes relax some.
I used chrome tape I found on amazon. In the pictures there's a seam because I bought 1/2in tape, but you can buy 1 inch wide tape to not have a seam. You cut it to length and then trim the edge to fit the rest of the form.
https://www.amazon.com/dp/B07QGL26PK Here's the tape that I bought, but any tape that is reflective works.
Print out a single tall one first to make sure your eyebrows don't hit the edge. If they do, print the short one.
Needs supports, I recommend using support enhancers on only the bottom edge of the model for ease of removal. You should also print it at a layer height lower than .2, so that the clip in part at the top can print cleanly.
Inserting it can be a bit finicky, but as long as it looks aligned you should be able to force it in. The more gradual edge is the one that goes against your eyebrows.
This can definitely be modified to also accommodate prescription lenses like Zenni's, but I don't have the patience or CAD knowhow to do that cleanly. Feel free to re-remix this to support that! I have to sacrifice my prescription lenses to use this so I'd love to see a combo model.