Kumiko Goma Jewelry Box — 200 mm, dual-colour lattice lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jewelry box with a printed Kumiko "Goma" lattice lid. Separate flat-printed insert gives a clean two-colour look without
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
A 200 × 200 mm jewellery box with a hinged lid whose centre is a printed Kumiko "Goma" lattice — the traditional Japanese woodworking pattern built on a triangular jigumi with infill ribs that cut each corner at 1/3 of the edge, giving hexagons in the middle of every cell and small triangles around every node.
The lattice is a separate, flat-printed insert, so you get a clean two-colour result without a multi-material printer and without a single filament change: print the box and lid in white, the grid in black, drop it in, glue.
Behind the grid sits a 1.5 mm clear acrylic pane, glued flat to the underside of the lid. It keeps dust out of the box while the pattern stays fully visible.
Dimensions
Part | Size |
|---|---|
Box / lid footprint | 200 × 200 mm (lid 205 × 205 with the outer skirt) |
Lid plate | 2.0 mm thick |
Window | 180 × 180 mm, R2 → 12.5 mm frame all round |
Kumiko grid insert | 179.4 × 179.4 × 1.9 mm |
Acrylic pane | 186 × 186 mm, R5, 1.5 mm |
Lattice cell (jigumi triangle) | 30 mm, bars 2.4 mm, ribs 1.6 mm |
Print settings
Material: PETG (PLA works just as well). White body + lid, black grid.
Layer height: 0.2 mm
Grid: flat on the plate, 4 perimeters, 100 % infill, no supports. Every feature is ≥ 1.6 mm, so it prints solid with a 0.4 mm nozzle.
Lid: no supports needed.
Slow the first layer of the grid a little — it is a large, thin part and benefits from good bed adhesion. A brim is optional.
Assembly
Cut the acrylic to 186 × 186 mm (1:1 SVG included) and round the corners to R5.
Glue the pane flat to the underside of the lid, centred over the window — 3 mm of overlap all round. Use UV resin glue or thin double-sided tape; avoid cyanoacrylate, the fumes fog acrylic.
Press the black grid into the window from the top and glue it along its edge. It sits flush with the lid surface (0.1 mm below) and traps the pane in place.
*AI disclosure: the Kumiko lattice was generated by a Python script written with Claude (Anthropic), and this description was drafted with AI as well. The box and lid geometry, the print testing and the assembly are mine.
