SUBARU - Alternator cover-belt pin replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for the broken retaining pin on the original Subaru XV 2013
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement for the broken retaining pin on the original Subaru XV 2013 alternator cover-belt
(Cover Belt ALTNTR ref : 23774AA050)
On the original part, this pin breaks over time forcing you to replace the whole piece. This model reproduces only the missing pin, to clip onto your existing part.
This part is intentionally designed to be little flexible, so if too much force is applied, the 3D printed piece breaks first, not the little material remaining on the original part.
I'd recommend printing it in, in order:
PC Blend - best heat resistance
ASA - good heat
PETG - what I used, it's working fine so far, it's not a spot with high heat in the engine, but keep an eye on it over time regardless.
Likely compatible with other Subaru models using the same part (Forester, Impreza, Legacy, Exiga).