Mic Stand Pickholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pick Holder for mic stand.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
Pick Holder for mic stand either for the boom (10mm > 12mm) or for the mast (15mm > 20mm, which also fits on flexible neck) in 2 different sizes for thin picks (0.5mm > 1.5mm or thick picks 1.5mm > 2mm +).
I think TPU is the best for these as it allows flexibility.
This is the 3rd Version and I have tested under 'battle' conditions.
The length can be varied easily and I have made many for bandmembers at 150mm
I have found printing on a Creality CR10 Smart Pro that printing on end with a 10mm brim keeps adhesion.
I have printed them in multiples though above approx 4 at a time was problematic.
Hope to se lots of them on stages!