1 / 2
Makera Z1 vacuum port to 1/2 NPT  adapter — zdjęcie 1
1 / 2

Makera Z1 vacuum port to 1/2 NPT adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Allows the connection of large air line for a vac pump to the back of your Z1

Ocena
0 / 5
Polubienia
5
Pobrania
5
Wydruki
0
Wyświetlenia
122
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

I purchased the shop Z1 with the optional vacuum bed. It works, but only barely, since it uses the stock dust extraction (an over engineered shop vac) to provide pull down, and those kinds of vaccums do not like being starved of air from a well sealed bed. 

Since I have multiple machines that use vacuum holding, I had a spare pump laying around. Im connecting it with 1/2" PU tubing and press fit connectors, and the best part, I will be able to use the dust collection  while also using the vac bed. 

I printed in ASA,  0.15 layer height, 4 walls. Supports only on bed. 

Tagi