Snowpeak / AirVenturi AP900 permanent fillprobe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I love the AP900 but I hate filling it up with the probe, cant leave it in as it looks terribl so I had to do something.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The AP900 is amazing all around BUT I cant stand the refill process, you either leave the probe in the port which looks terrible , or you insert and pull it out every time you need to refill it and most likely loose it placing it aside. I designed a solution that not only permanently has the fill probe in place, it also comes with a protective TPU cap and completely kills the issue with bigger silencers that need to be taken off before being able to refill the air tube.
My Design slots on perfectly and holds the probe in place by gripping a groove on the probe, no loosing the probe, no removing the moderator/ silencer when filling up the reservoir.
The fill probe dust cover cap simply slots in the main part, no glue, no screws. The whole part is held back by the pressure gauge and is rock solid. You only need to attach the TPU dust cover to the main part, unscrew the pressure gauge( depressurize first!!!!!) , slot the part in place and screw the gauge back on done.