Fimi X8 bubble level platform
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small platform/holder for a bubble/spirit level, which can be convenient if you want to place the drone…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a small platform/holder for a bubble/spirit level, which can be convenient if you want to place the drone level in the field.
The platform has been made so it slips over the drone body near the front, between the motor arms. The bottom is shaped so it locks into one specific position on the drone, and the top is then level if the drone sits level (with arms folded out).
I just found a small bubble level in a local shop, and attached it with double-sided sticky tape.
Print Settings
Supports:
No
Resolution:
Your choice, I recommend 0.2 mm or better
Category: R/C Vehicles