Hair Booper Electrolysis Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box for a DIY electrolysis machine, made to be compatible with the Gridfinity system.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This is a box made to be compatible across the different versions of Hair Boopers, and to nest inside Gridfinity boxes. I like using this 5x4 model (https://www.printables.com/model/894202-modern-gridfinity-case ), but any box will do.
Since there are a lot of batteries out there, I didn't design in a battery holder. Instead, I designed the main box to use this 18650 holder: https://www.printables.com/model/992701-wired-18650-holder . If you'd like to design your own, just know that the mounting holes are 3mm in diameter and 50mm on center.
In the files you'll also find a simple foot pedal switch made for use with either 3mm x 10 or #6 x 1/2 screws.
So far I've designed two stylus'. I'd recommend the marker if you're prone to carpal tunnel like me. The compass can be quite convenient if you're working on yourself, as it uses a 1/4 stainless steel bolt anode as it's handle.