PVS-14 magsafe phone recorder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EDIT THE GEOMETRY ACCORDING TO YOUR PHONE pvs 14 recorder using 20mm beam splitter prism.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NEED ADDITIONAL FITTING TO PROPERLY USE
It's a crude pvs 14 recorder using phone with magsafe case. So do not expect much from it.
STEP file is included so use CAD program and make simple mock up of your phone.
Align your 1x part of phone camera to middle of 20mm prism and edit magnet holder part accordingly
Now you are good to start printing.
Print setting: 5-6walls, normal snug support
BOM: M3 cap screw 14mm and 25mm, 20mm beam splitter prism, raw magsafe magnet
Add pause before closing up magnet holder and insert magnet.
Double check magnet you've purchased does not protrude so it doesn't affect printing.