Support test with sphere shape for PETG
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is to find out support setting for top and bottom of support. Top shape includes plane and half of a sphere.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 527
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
This is the remix of the original design for support test to find out the best condition for each filament. I designed support test pieces to top and bottom of the support. But when I printed like sphere shape object, I need more study, so I added half of sphere on the design.
If you like, please change the setting to your environment and try to find out appropriate setting.
In my case for RepRapper PETG, No.11 and 12 are the best. To reduce the print time, I prefer to use No.11 setting for my print.
If you need more support or change the design, please send me comments.
Enjoy printing!