Simple Praki Dessicant & Hygrometer Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got sick of searching for something simple to fit noth dessicant and the round hygrometers so I made my own!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I spent hours searching for a simple dessicant and round hygrometer holder that would simply friction fit into the Praki Cereal container so I made my own. I wanted it to be SIMPLE. The hygrometer is basically the lid so it's one piece. I designed it to need ZERO supports.(Just be sure to choose "MAKE OVERHANGS PRINTABLE" ON THE QUALITY TAB assuming you're using Orca) Threre's no need to beconcerned about the seal since you keep the container intact. I've tested it without any spool roller as I don't typically print from the box so keep in mind if you have a spool roller that elevates the spool as it could contact the holder.
It is STRONG if printed with 3 walls and 15% gyroid infill. I used a Kingroon HS-PETG which fits very snug into the flip up lid on the Praki cereal container. You can fit 16 on pretty much any build plate.
I'll admit that the Hygrometer can be a little fussy removing as they usually split apart and need to be snapped back together. To try and Avoid this I've cut two notches into the top rim so you can twist the hygrometer till the notches and tabs line up and it easily removes.
Please feel free to leave me feedback. I only have Tinkercad skills so it's not very refined, But if you're like me you'll love the simplicity and the ease of printing... not to mention the fact that it's capable of withstanding a fall without leaving little round beads all over your floor.