Solu-Cortef Act-o-Vial Carrying Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a two-part locking vial that can hold one Solu-Cortef vial, cushioned with a cottonball.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a two-part locking vial that can hold one Solu-Cortef vial, cushioned with a cottonball.
The top has 3 lugs that slide into channels on the bottom and "lock" with a slight turn.
I sized this so the vial fits securely, cushioned with a bit of cotton on the top and bottom. Once "locked," the vial shouldn't move within the capsule.
Be careful not to pack it too tightly, because you don't want to put too much pressure on the top and accidentally activate the vial.
This allows me to carry 2 vials (each in their own capsule) in my emergency kit, along with my other supplies.
Printing:
Make sure to orient both pieces so their flat parts are at the bottom.
I printed this with PLA on an Ender 3 V2 Neo without supports
I used 20% infill, which seems to be plenty. The side walls feel solid.
For a bit of design flare, I printed a red cross-style logo from https://www.thingiverse.com/thing:3016435 and glued it on top
I used ChatGPT to help with the design