1 / 3
ReprapDiscount Full Graphic Smart Controller mount for 2020 profiles
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Mount the cheap graphical reprapdiscount 12864 "Full Graphic Smart" display with sdcard reader to any 2020 aluminum profile corner with this frame. Needs no support to print.
Use "m3direct" version for mounting without brass inserts (holes for display screws are smaller in diameter and should fit to M3 screws directly)
Print Settings
Printer:
TronXY X5S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.6 mm nozzle, 0.24 mm layer height
Infill:
15%
Filament:
Generic budget PLA
any
Notes:
- print face down; needs no supports that way but your printer should be capable of handling 45° overhangs
- four M3 brass inserts size 4 mm Ø x 6 mm length to hot-melt into the screw holes of the frame four M3 x 10 mm screws. 3x M4 x 8 mm screws 3x T-nuts for 2020 profile
Post-Printing
Additional parts
Category: 3D Printer Accessories