Kemo M176 mount for the KAROQ
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kemo M176 bracket for the Škoda KAROQ battery mount
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Kemo M176 Marten Repeller Mount for Škoda Karoq (Battery Bracket Mount)
A custom-designed 3D printable bracket for mounting the Kemo M176 acoustic marten repeller in the engine bay of a Škoda Karoq. It attaches directly to the factory car battery bracket, requiring no drilling or permanent modifications to your vehicle.
Hardware Required:
1× M4 × 8 mm screw + M4 nut (to attach the repeller to the mount)
1× M10 nut + washer (to secure the bracket to the battery mount stud)
Print Settings & Recommendations:
Due to elevated temperatures inside the engine compartment, print this model using heat-resistant materials such as PETG, ASA, or ABS (PLA is not recommended as it will deform).
Layer Height: 0.2 mm
Infill: 20–30% (for strength)
Supports: Not required