Japanese Lantern Echo Pop Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Echo Pop lantern with modular 3-foot pedestal, taller chamber, cable routing and a print-first fit tray.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
A Japanese lantern-inspired indoor stand adapted for Amazon Echo Pop. The modular pedestal is 914.4 mm (36 in) tall to the lantern support surface.
ECHO POP REVISION
Designed around a nominal 99 × 83 × 91 mm speaker envelope. The revised body provides 103 × 95 mm clearance, a chamber raised by 50 mm, a 20 mm central cable passage, recessed cable channel and rear exit. The original pedestal and roof geometry are retained.
PRINT THE FIT TRAY FIRST
Check your actual Pop, rubber foot and power plug in PRINT_FIRST_Pop_Clearance_Tray.stl before printing the full body. Verify the connector passes through the 20 mm opening. This is a loose clearance tray, not a contour-fit socket. Do not scale individual parts.
FILES AND QUANTITIES
7 STL files and assembly README. Print one body, roof, base reservoir, base cap and top adapter; print four copies of the column. The small tray is for testing. Existing owners of the original stand and roof need only the revised body after checking fit.
PRINTING AND ASSEMBLY
PETG; 0.20–0.28 mm layers; 4 walls; 5 top/bottom layers; 20–25% infill. Units are mm. Inspect supports for decorative overhangs in your slicer. Route the cable through the pedestal and body floor, then toward the rear (+Y). Face the speaker toward -Y. Remove the roof to access top buttons. Ballast the base with dry sand and secure stand joints.
TEST STATUS
STL surfaces and winding checked digitally; rectangular device envelope and straight top insertion path checked for no body collision. The owner confirmed physical testing of this Echo Pop revision on September 12, 2026 and reported that all is well. Check sound and microphone pickup in place. Gallery images are 3D model renders and a digital clearance diagram, not photographs of physical prints. Use indoors in a dry location; the printed roof does not weatherproof the Echo Pop.
ATTRIBUTION
Adapted from our Japanese Zen Garden Echo Dot 3 stand: https://www.printables.com/model/1836619
Underlying source: Nrmilanovic, “Amazon Echo Dot 3rd Gen Rain Cover”: https://www.thingiverse.com/thing:5395708
Creative Commons Attribution 4.0: https://creativecommons.org/licenses/by/4.0/
Changes include decorative enclosure, modular pedestal and Echo Pop cavity, cable routing and taller chamber. AI-assisted creation. Amazon and Echo belong to their respective owner; no affiliation or endorsement.