The MagiSaurus Project
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Don't be scared - it only looks like it is moving!
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 687
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a re-mix of my SantaSaurus project, now with a Magician's Top Hat!
The Magisaurus is inspired by the work of magician and optical illusion inventor, Jerry Andrus. many paper versions of a dragon moving it's head about are available as well. I decided to see if I could 3D print one - here is the result.
Here is a video of what it looks like on your table:
And if you are not sure how it works, here is the Reveal:

The way it works is using the way your brain sees convex and concave shapes, Your brain sees faces as convex, meaning the sides curve away from you, but the dragon's head is concave. That mixes up the cues from your brain as you move around the dragon, making it look like the dragon's gaze is following you because your brain wants to interpret it as a face. So your brain is getting tricked.
This is an easy to print illusion that you can display anytime of the year time! Make a bunch and they will follow you around the room.
There is a slit on the main body to allow a 15 degree tilt to the head (though I found it works just fine without). You may find a small piece of tape on the back of the print will keep it strong enough.
How to print:
This is an easy print and only takes 5 parts: The main body, head, two side frames, and a rear frame. I printed mine in various colors of PLA - No supports are needed for any of the prints. Just use contrasting colors for the best result
Here are the files and how I printed them:
File: 2026-09-21 (1) Body.stl (Print one of these to build one Magisaurus)
Color change at 0.95, 3.20
File: 2026-09-21 (1) Magician Head - Top Hat.stl (Print one of these to build one Magisaurus)
Color change at 0.95, 1.10, 2.30, 3.20
File: 2026-09-21 (2) Side Frame.stl (Print two of these to build one Magisaurus)
Color Change: None, single color print
File: 2026-09-21 (1) Rear Frame.stl (Print two of these to build one Magisaurus)
Color Change: None, single color print
After printing, assemble the 4 parts - they will simply slide together and should not require glue (but you can glue it if you wish). The slots on the sides have a compound angle - pay attention during assembly to keep all parts in the correct orientation (see the photos for details).

Fold the “Head” as shown and press it into the slot on the body (do not fold the hat at this time). If your print has trouble fitting in the slot, file the bottom side of the “head” to slide it in easily. After seating the head, bend the hat up - the hat can be glued or taped as needed. It was just that easy!

If you are going to glue it up - just use Super Glue as needed!
The Alternate files - The Mega-MagiSaurus
The alternate files will allow you to create a GIANT version of the Magisaurus - This set separates the body and the head, and connects them with a collar (this can also be printed this way at regular size)!

Lay it on you table and walk around - It's watching you!
Please share your makes and comments!