Qidi X-Plus3 OV9732 chamber camera module mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small mount for an OV9732 USB camera module inside the X-Plus3
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Small mount for an OV9732 camera module inside the X-Plus3, which just slides on top of the left gantry motor tower / mount.
These modules can be had for somewhere between 5€ and 20€ on Amazon / Aliexpress, I recommend getting a 185° M12 lens aswell, since as you can see in my picture, the FOV with the standard lens doesn't allow for the whole bed to be seen.
If your module has this style, you need to clip off the outer parts, so just the roughly 32x32mm PCB is left.
It is then clipped onto the two pins on the mount and glued down with super glue, the whole thing can then be slid onto the motor tower.
This should be a friction fit, if yours is too loose, consider using some double-sided tape there.