1 / 8
TronXY X5S Mainboard Fan Cover for 80mm fan — zdjęcie 1
1 / 8

TronXY X5S Mainboard Fan Cover for 80mm fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This replacement cover for the TronXY X5S mainboard accepts a standard 80mm fan with a height of 25 mm. The base and…

Ocena
0 / 5
Polubienia
0
Pobrania
17
Wydruki
0
Wyświetlenia
196
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

This replacement cover for the TronXY X5S mainboard accepts a standard 80mm fan with a height of 25 mm. The base and cover both have four pegs that keep both the fan in place as well as the cover once it is clipped on. Main purpose is to reduce the fan noise by using a bigger and quieter fan instead of the original 40mm "whiner".

UPDATED: Front cover replaced with a version that does not resonate with the blades of some fans – only noticed this when I tried a silent fan and got air flow noise because the blades had the same curve and caused internal vibrations as they passed in the "air shadow" behind the bridges.

Print Settings

Printer:

TronXY X5S

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

Printed with a 0.6mm nozzle at 0.333 mm layer height

Infill:

15% Honeycomb


Notes:

May need to widen the M3 holes, depending on your printer. The fan should fit without play between base and cover.

Category: 3D Printer Accessories

Tagi