1 / 4
ZK-T469 Battery Internal Resistance Tester GX16 Housing — zdjęcie 1
1 / 4

ZK-T469 Battery Internal Resistance Tester GX16 Housing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 3D-printed housing that adds a GX16 connector to the ZK-T469, allowing the use of external 4-wire battery test fixture

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
44
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This project was designed to turn the affordable ZK-T469 into a more versatile and convenient battery internal resistance tester.

The housing adds an external GX16 connector to the bottom of the ZK-T469, allowing it to be used with interchangeable 4-wire battery test fixtures, probes and Kelvin accessories.

The main idea was to use the ZK-T469 with universal battery test holders like the one shown in the photos. These fixtures make it possible to quickly test different battery and cell formats without having to manually hold probes against the battery terminals.

The ZK-T469 uses a 4-wire Kelvin measurement system, making it particularly suitable for this type of setup.

The housing is designed to:

- Add an external GX16 connector

- Provide a clean and secure connection

- Allow the use of interchangeable 4-wire test accessories

- Make testing different battery formats faster and more repeatable

- Turn a relatively inexpensive internal resistance tester into a more practical battery testing station

The concept is not limited to a single battery holder. Any compatible 4-wire accessory can potentially be connected through the GX16 interface, provided that the pinout is correctly matched.

The goal of this project is simple: build a versatile battery internal resistance tester without spending a lot of money on specialized equipment.

Check the connector pinout carefully before connecting any external accessory. Different battery testers may use different connector types and pinouts even when they use the same 4-wire Kelvin measurement principle.

Materials:

If you build one, I'd love to see your setup!

Tagi