Toyota Tundra 3rd Gen TRD Pro Hood Vent Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom inserts for the oem TRD Pro Hood Vents.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
For those that want the look of the Toyota TRD Pro hood vents without wearing the TRD Pro badging, this is my solution.
This is a set of inserts for the hood vent that replace the OEM insert, utilizing all the existing tabs - this is a snap in replacement that fits just like the original. I have provided several popular options pre-designed, as well as a blank offering that can be downloaded and modified to have the logo and/or text of your choice.
Note again that this is different than some popular aftermarket offerings that are applied ON TOP OF the OEM badging. These pieces completely replace the OEM insert for an exact fit, matching the original aesthetic look. You will need to replace the insert before applying the vent assembly to the hood as it is inserted from the back. Existing vents would need to be removed and reapplied.
Note: The inserts are not symmetrical - you will need to download and print both a left and a right piece.
Printing tips:
These should be printed flat, out of ASA for UV resistance, and in an enclosure with at least a 15-20 minute dwell period at full bed temp to prevent warping. I have added "mouse ears" to each end of the model to assist preventing curl up of the ends. These are easily snapped off after printing. I have successfully printed without warping with just these changes. You may decide to add an additional outside brim in your slicer if you still run in to issues.
Layers, Walls and Infill: 6 top and bottom layers, 3 walls, gyroid infill at 30%. I adjusted my bridging angle to 90 degrees to ensure strongest orientation of the lines in the tabs that surround the part.
Supports: I recommend auto supports, snug, with 2 interface layers.