Aura Arch – Hair Claw Clip & Scrunchie Tower with Vanity Catch-All Dish
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular Nordic arch stand for claw clips, scrunchies & jewelry. Includes 2-piece & 1-piece versions. 100% support-free!
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 565
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
# Aura Arch – Hair Claw Clip & Scrunchie Tower with Vanity Dish
Say goodbye to messy bathroom counters and lost hair accessories! The Aura Arch is a sleek Scandinavian vertical organizer designed specifically for claw clips, scrunchies, and vanity jewelry.
Now includes both 2-Piece Modular & 1-Piece Monolithic editions in the download files!
---
### 🌟 Two Print Options Included:
1. 2-Piece Modular Edition (Recommended):
Features deep *28 mm precision alignment pins** connecting the arch to the base.
* Effortless Scrunchie Loading: Simply lift off the upper arch, slide scrunchies on and off without stretching them, and pop it back onto the base!
* Files: Aura_Arch_Tower_Modular_Base.stl & Aura_Arch_Tower_Modular_Arch.stl.
2. 1-Piece Monolithic Edition:
* Prints as a single solid unit with zero assembly required.
* File: Aura_Arch_Claw_Clip_Tower.stl.
---
### ✨ Features & Dimensions (135 × 90 × 160 mm):
* 6 Stepped Claw Clip Rails:
3 specially profiled fins on each flank securely hold small, medium, and jumbo claw clips without over-stretching their internal springs.
* Curved Arch Bridge:
Holds silk scrunchies, hair elastics, and headbands within easy arm's reach.
* Oval Vanity Dish Base:
The integrated tray at the bottom catches bobby pins, small elastic ties, rings, and earrings so they never roll off into the sink.
* 100% Support-Free:
Both the 1-piece and 2-piece modular versions are engineered to print completely without supports, rafts, or brims!
---
### 🖨 Recommended Print Settings:
* **Supports:** NONE (100% support-free print on both versions)
* Layer Height: 0.20 mm
* Perimeters / Walls: 3 to 4 (gives rigid, durable pillars)
* Infill: 12% – 15% (Gyroid or Grid)
* Material: PLA (looks gorgeous in Matte Cream, Marble, Terracotta, or Sage Green) or PETG