Lawn Sweeper insert for rear wheel addition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a basic shape to fit into the end of the plastic leg of the Vevor Lawn Sweeper to add some wheels.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a basic PLA shape to fit into the rear space of the Vevor lawn sweeper legs to add wheels. My intent for adding wheels is to keep the sweeper as low to the ground as possible without dragging the legs and eventually destroying them. The add'l wheels also add ease of use. Original intent was to 3D scan the leg and make a perfect fitting part but needed to use it and made this quickly. I will upload a remix when/if I can make a perfect fitting piece. 4 walls, 50% infill, gyroid.
The wheels are made of TPU. I used the file uploaded by this creator:https://makerworld.com/en/models/2924248-parametric-wheel-for-608z-ball-bearings#profileId-3272709
(2) M8x1.25x40mm with (2) #8 washers and (2) M8x1.25mm hex nuts. (2) 608-2RS bearings.