Vertical Table Stand for Loxone Presence Sensor Air
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vertical stand for the Loxone Presence Sensor Air 100420. Tool-free installation with no supports required.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
A tabletop stand designed for the Loxone Presence Sensor Air 100420.
It allows the sensor to be placed vertically on a desk, shelf, or cabinet. The sensor simply slides into the semicircular slot from above, without screws, adhesive, or modifications.
The holder grips only the outer rim, leaving the front lens unobstructed. Its wide, rounded base provides stability while maintaining a clean, minimalist appearance inspired by the Loxone design language.
Features:
Compatible with the Loxone Presence Sensor Air 100420
Designed for operation with 2 AA batteries
Tool-free insertion and removal
No screws or adhesive required
Unobstructed front lens
Bottom recess for optional adhesive weights
Stand dimensions: 116 × 72 × 38 mm
Recommended print settings:
Material: PLA or PETG
Layer height: 0.20 mm
Nozzle: 0.4 mm
Perimeters: 2
Infill: 8%
Supports: not required
Orientation: print with the flat base on the build plate
The slot has approximately 0.4 mm of clearance on each side. Fit may vary depending on printer calibration and material, so printing a small test section of the slot before the complete model is recommended.
Please note: the Presence Sensor Air is primarily designed for ceiling installation. When positioned vertically, its detection pattern and effective coverage will differ from the manufacturer’s specifications.
This is an independent, unofficial accessory. Loxone is a trademark of its respective owner. This design is not affiliated with, endorsed by, or sponsored by Loxone.