1 / 1
IKEA BILRESA Hager Wall Plate Mount — zdjęcie 1

IKEA BILRESA Hager Wall Plate Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount IKEA BILRESA buttons on a Hager light switch wall plate

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
34
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Designed for Hager brand light switch wall plates. The dimensions and tolerances on these seem to vary slightly, but this has been the most consistent peg mechanism that's worked for me.

Hardware Required & Assembly

  • 2 x Countersunk M3x6mm machine screws

Printing Instructions

  • Material: PLA or PETG will work great.

  • Layer height: 0.2mm recommended

  • Supports: Not required

  • All other settings: Leave default!

Orientation should be obvious!