Utility Knives (9mm & #11 Scalpel)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Utility Knives (9mm & #11 Scalpel) fully 3D-printable utility knife handles designed for standard blades
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 361
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3D Printed Utility Knives (9mm & #11 Scalpel)
These are practical, fully 3D-printable utility knife handles designed for standard 9mm segmented blades and #11 scalpel blades. They are lightweight, quick to print, and feature a secure locking mechanism.
Features
Two Models Included: One handle designed specifically for 9mm snap-off blades, and another for standard #11 scalpel blades.
Quick & Efficient Print: Both models can be printed together in approximately 1 hour.
Lightweight Design: The combined weight of both printed models is only ~20 grams.
Secure Locking Mechanism: The orange sliders feature an integrated locking design to keep the blade safely in place during use.
Built-in Snapping Slot: The 9mm version includes a convenient slot at the rear of the handle for safely snapping off used blade segments.
Recommended Print Settings
Material: PETG is highly recommended for its durability and wear resistance, especially for the sliding mechanism. PLA can be used, but may be more brittle.
Layer Height: 0.2mm works well for a good balance of speed and detail.
Infill: 15-20% is sufficient.
Assembly Instructions
Print the main body (black) and the slider (orange) for your chosen blade type.
Carefully insert the blade into the slider.
Slide the assembly into the main body track.
Note: Always exercise caution when handling sharp blades during assembly and use.
Enjoy your new, custom-printed utility knives!