BLUM cocealed hinge jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jig for mounting Blum Clip concealed hinges
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 383
- Wydruki
- 0
- Wyświetlenia
- 2954
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
UPDATE 03.01.2022: I've added a new jig, for other types of 35mm concealed hinges, at https://www.printables.com/model/184125-universal-35mm-concealed-hinge-jig
I created this jig for 35mm BLUM concealed hinges. The hinges from other brands uses the same measurements, except the hinge screw hole, that is in upper or lower position, but usually at the same horizontal distance (45mm). In this case, the jig can be used as a square to draw the lines for proper alignment of the hinge.
This jig uses the maximum (6 mm) distance from the door edge and 0 mm from the cabinet edge (for the mounting plate). If less than 6 mm is required, you can use some ice cream sticks as spacers.
To mark the position of the holes i use a pencil or an awl. The mounting holes and the 6mm distance are marked on the visible side to prevent confusion.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament: SAKATA PLA blue
Category: DIY