Semi modular vertical sunhood for camera monitor (Viltrox DC-X2/X3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This sunhood is made to be modular, with a mouting at the center or at the top. It was based on a Viltrox DC-X2.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
With the age of vertical video upon us, there are not that many,if any vertical sunhoods for camera monitors. While we need to film vertical. That seemed odd to me, so I started designing this one.
This model was made for all different kind of camera monitors. But more specifally the Viltrox DC-X2. Every part needs to be printed once, except the clips, those need to be printed twice.
You will need a normal monitor mounting screw(1/4 inch) and 3 M3 nuts and bolts. The design should be fairly self explaining, and is foldable
While it certainly is not perfect. it is a step in the right direction, and changes will be made in the future to make it more compatible with other monitors and such.
