Brother / Acra GB4600 Treadmill Phone & Tablet Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple 3D printable phone and tablet holder designed specifically for the Brother / Acra GB4600 treadmill console.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
After buying a used Brother / Acra GB4600 treadmill, I quickly realized that there was no convenient place for a phone or tablet.
Instead of using generic flexible mounts, I designed a holder specifically for the shape of the treadmill console.
The final design is the result of several iterations, prototype prints and real-world testing while walking and running. The goal was simple:
- No screws
- No glue
- No modifications to the treadmill
- Stable during treadmill vibration
- Comfortable viewing angle
- Easy and fast printing
The holder simply slides over the center section of the console and stays in place using the console geometry itself.
In my testing it remained stable during normal treadmill use and comfortably supported both phones and tablets for watching videos, following training plans or listening to audiobooks.
It may also fit other treadmills with a similar console shape, but compatibility has not been verified.
Printing
Recommended material:
- PETG (tested)
- PLA should also work for indoor use
Layer height:
- 0.2 mm
Infill:
- 15-25%
Supports:
- Required
Orientation:
- Print upright as shown in the photos
No additional hardware is required.