Linear Gearbox Polar Wedge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Polar Wedge with linear gearbox This is a little but solid polar wedge for astrophotography.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 368
- Wydruki
- 2
- Wyświetlenia
- 2482
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Polar Wedge with linear gearbox
This is a little but solid polar wedge for astrophotography.
I designed 2 versions of the Base, one with a 1/4" hole to mount it on a arca-swiss plate and one with a Arca-Swiss Base but the Arca-Swiss Base is much more stable. You can mount it directly on a normal tripod with Arca-Swiss.
The PolarWedge can rotate about +/- 60°
The Setup, you can see on the photos, weight is 4292 gramms and it is not a problem for the PolarWedge.
You can print all parts without supports.
Hint:
Print the Rack on the side and the knob on the small diameter, it works!
Parts, you need to assemble:
- 1x M8x45mm Hex Screw VA
- 1x Locking lever M8
- 1x M4x60mm Threaded Rod VA
- 1x M4 Hex Nut VA
- 1x M4 Hex Nut witch cap VA
- 1-2x 1/4" Nut VA - one for the wedge, ode for the base without Arca-Swiss.
- 1x M4 Insert max. 10mm long for the Rack
- 1 drop of superglue for a nut on the M4 threaded rod
- 1 drop of Loctite 243 for the nut with cap in the knob
In the pictures you can see a complete setup with:
StarTracker: https://www.thingiverse.com/thing:4889007
The tracker has tuning parts: https://www.printables.com/de/model/184153-tuning-parts-with-bearings-for-heavy-duty-planetar
L-Mount: https://www.printables.com/de/model/184152-l-mount-for-heavy-duty-planetary-astro-tracker
Caps for Polarscope: https://www.printables.com/de/model/184149-caps-and-tool-for-polarscope
Notes:
No Supports needed, print it with 100% infill for maximum stability.
I printed it with Carbon PETG